We made a Fresnel.
C3 is a 3000W full-colour LED Fresnel, and the first fixture in a new product line from Creamsource. It gives you the things you want from a Fresnel — a controllable beam, smooth roll-off, and crisp, defined shadows — with a few less traditional ideas inside.
The square Fresnel stays fixed while the light engine moves behind it, taking the beam from 18° to 60°. At full spot, C3 delivers an average 10,000 lux at 10 metres, with notably high efficiency for a point source of this scale. The ballast is built in, the housing is IP65-rated, and an integrated cage gives you plenty of options for handling and rigging.
Panels, Fresnels, hard light, soft light. They all have their place. The fun is in choosing what the shot calls for. C3 gives you one more for the kit.


RUGGED
CAGE

SQUARE
FRESNEL

MOTORISED
FOCUS

5-YEAR
WARRANTY
Watch the video.
Ethernet
Bluetooth
DMX
LumenRadio
Accessory Port

IP65 rated
C3 doesn't mind getting wet.
The lens doesn’t move
Spot-to-flood movement happens inside the unit, from 18° to 60°. The Fresnel lens stays fixed in its position. Manual or DMX.
Published figures: 10,000 lux at 10 m in full spot, 1,500 lux at 10 m in full flood. Values between those two points are interpolated.

It’s in the genes.
C3 runs the same Creamsource Colour Management System (CCMS) as Vortex and Micro — factory calibration and colour algorithms in native CIE xy space — keeping fixtures matched to each other, accurate at every dimming level and stable as they warm up.
Control is familiar too: CreamOS and the web GUI, DMX, LumenRadio TimoTwo with BLE, etherCON and USB, plus FrameSync, camera sync input and flicker-free shooting past 5000fps.
COLOUR CONTROL
Over 92% of Rec. 2020.
A newly designed 7-colour LED engine, BCGLARD, covers over 92% of Rec. 2020.
CCMS keeps it accurate, and keeps fixtures matching each other, as it does with all other Creamsource fixtures.
A Fresnel gets used as a hard source, pushed through diffusion, or thrown from a distance to cover something large. None of that has to start with white light, and getting to a colour doesn’t have to start with a walk back to the truck for gel.
THE CAGE
Made to rig.
The cage gives you plenty to grab onto and multiple ways to rig C3. Use LNX to join C3s into larger arrays. The square Fresnel minimises gaps between emitting areas, reducing the diffusion needed for an array to read as one source.
Things will break.
Eventually. Equipment gets rigged, transported and worked hard. C3 was designed with that in mind — reducing potential failure points and keeping servicing straightforward if something does go wrong. It’s backed by a five-year warranty, so you can work with confidence.
Behind the Scenes of Chang’e
Shot on 35mm by Luo Pan ASC, CNSC, and directed by Arden Tse.
C3 Preliminary Specs
Power
3000W
Light Source
BCGLARD (Blue – Cyan – Green – Lime – Amber – Red – Deep Red)
Colour Range
CCT: 2200 – 15000K, Plus/Minus Green, Hue/Saturation, xy, Gels, Calibrated RGBW, Effects
Colour Quality
CRI: 98 (Typical)
TLCI: 98 (Typical)
TM-30 (Rf): 96 (Typical)
TM-30 (Rg): 100 (Typical)
Beam Angle
Spot: 18°
Flood: 60º
Illuminance
Spot: 10,000 lx @ 10m
Flood: 1,500 lx @ 10m
Control
On-Board Interface, DMX via standard 5-pin XLR connectors, Wired Remote Control Accessory, Integrated LumenRadio TimoTwo with BLE, 2x etherCON, USB
High Speed Capabilities
Over 5000fps Flicker Free in High Speed Mode
Synchronisation
Sync Input for Triggering and Syncing to Camera Shutter
Protection Class
IP65
Head Weight
45 kg / 99.2 lb (Excluding Yoke)
Dimensions
855 x 515 x 500 mm / 33.66 × 20.28 × 19.69 in



